Rim Error 1887 O

General discussion board about VAMs, but no buy/sell offers
Post Reply
maessedai
Posts: 31
Joined: Sat May 09, 2020 1:08 am

Rim Error 1887 O

Post by maessedai » Fri Sep 25, 2020 2:01 am

I have this 1887 O that has some missing reeding. The second reeding shot shows that the reeding is recessed (or poorly struck but then becames more clear towards the bottom. It looks to me like it was struck off center as the north side of the obverse rim is thicker than the south. Has anyone seen anything like this?
Attachments
IMG_1259.jpg
IMG_1259.jpg (191.44 KiB) Viewed 419 times
Obverse with Different Rim Sizes.jpg
Obverse with Different Rim Sizes.jpg (207.12 KiB) Viewed 419 times
IMG_1257.jpg
IMG_1257.jpg (39.92 KiB) Viewed 419 times
IMG_1256.jpg
IMG_1256.jpg (36.34 KiB) Viewed 419 times

maessedai
Posts: 31
Joined: Sat May 09, 2020 1:08 am

Re: Rim Error 1887 O

Post by maessedai » Fri Sep 25, 2020 2:03 am

And John I apologize my private message thing is messing up it appears (but maybe just user error)

Josh

evensocome
Posts: 115
Joined: Fri Jun 12, 2020 3:55 am

Re: Rim Error 1887 O

Post by evensocome » Fri Sep 25, 2020 3:41 pm

The last photo is the one of greatest interest - is this the first recorded edge cud?

User avatar
CascadeChris
Posts: 2485
Joined: Mon May 28, 2018 10:41 pm

Re: Rim Error 1887 O

Post by CascadeChris » Fri Sep 25, 2020 5:46 pm

evensocome wrote:
Fri Sep 25, 2020 3:41 pm
The last photo is the one of greatest interest - is this the first recorded edge cud?
Broken Collar errors are a thing. Not sure if this is one or not tho. Patiently awaiting the Fount of Knowledge @vampicker to drop in on this thread 😎🧐

Example from my collection:
20200925_104634.jpg
20200925_104634.jpg (83.13 KiB) Viewed 361 times
Last edited by CascadeChris on Fri Sep 25, 2020 6:14 pm, edited 1 time in total.
Alonzi VW 2.0!

vamsterdam
Posts: 827
Joined: Thu Jun 07, 2018 2:48 am

Re: Rim Error 1887 O

Post by vamsterdam » Fri Sep 25, 2020 5:58 pm

i have numerous collar cuds but this does not appear to be one. maybe a defective planchet.

vamsterdam
Posts: 827
Joined: Thu Jun 07, 2018 2:48 am

Re: Rim Error 1887 O

Post by vamsterdam » Fri Sep 25, 2020 6:02 pm

it does appear to have a collar clash on both sides. or it could be a misaligned with a collar clash. and the planchet may be defective. the collar may be chiipped(partial reeds). hard to tell.

User avatar
vampicker
Posts: 1184
Joined: Fri Jun 01, 2018 1:48 pm
Location: Ohio

Re: Rim Error 1887 O

Post by vampicker » Fri Sep 25, 2020 7:14 pm

Yeah, a broken collar looks very different and it's kind of a shame to put it in a slab - hides the effect. I'd think this is an early strike from a collar clashed die. See the other thread I bumped up. Now picture that die not being able to push outward the way it's intended to because of the pictured damage. As die wear makes the collar clash fade, the reeding would return to normal.
often the crusher of hopes and dreams

maessedai
Posts: 31
Joined: Sat May 09, 2020 1:08 am

Re: Rim Error 1887 O

Post by maessedai » Fri Sep 25, 2020 7:58 pm

I am new to error coins, is this something worth getting attributed by pcgs? Would they straight grade it or would i need to go through their mint error program? Thank you for clarifying it makes a lot of sense with the picture of the clashed die.

User avatar
CascadeChris
Posts: 2485
Joined: Mon May 28, 2018 10:41 pm

Re: Rim Error 1887 O

Post by CascadeChris » Fri Sep 25, 2020 8:42 pm

vampicker wrote:
Fri Sep 25, 2020 7:14 pm
Yeah, a broken collar looks very different and it's kind of a shame to put it in a slab - hides the effect. I'd think this is an early strike from a collar clashed die. See the other thread I bumped up. Now picture that die not being able to push outward the way it's intended to because of the pictured damage. As die wear makes the collar clash fade, the reeding would return to normal.
Right. It was a throw-in on a Carr sub (which ill share as an OT thread soon) with the 10+ for $10 free ship special. The non-edge view gaskets slipped my mind. Im gonna crack it and just keep the label with it and when I sell it down the road I'll just sell it with the label to give perspective buyers confidence in both the grade and error type. But, yeah, it was a headdesk moment when it came back for sure haha.
Alonzi VW 2.0!

Post Reply