General discussion board about VAMs, but no buy/sell offers
-
PacificWR
- Posts: 1419
- Joined: Mon May 28, 2018 12:17 pm
- Location: Kansas Flint Hills
-
Contact:
Post
by PacificWR » Thu Nov 07, 2019 10:41 pm
Received my Halloween candy from LVA on Monday. The candy turned out to be three new DC’s and two revisions. Not listed in the revision of the 1900-S VAM-20A is a very long die crack that runs from the forehead thru the eye and part way down the nose. The die crack actually becomes a very small die break in the eye, but because you need a scope to see it it's not listable. Check out the letter and plate photo’s below. The new pages and revisions have been completed. Meanwhile, back to the hunt there are more 1900-S puzzle pieces to be found.
Last edited by
PacificWR on Fri Nov 08, 2019 2:35 am, edited 5 times in total.
-
ljs123
- Posts: 1400
- Joined: Mon Jun 04, 2018 7:16 pm
Post
by ljs123 » Fri Nov 08, 2019 12:06 am
Yes, WTG Wayne.
Do you need help setting up the pages?
Ha, everyone knows that I would be of no help on the pages. You do so much good work on the pages, I wish that I could help you.
Thanks for all you do.
-
RogerRock
- Posts: 374
- Joined: Thu Jun 14, 2018 3:40 am
Post
by RogerRock » Fri Nov 08, 2019 12:24 am
Congrats Wayne! Your DC's reflect extensive die study on 1900 S .
Stage 3 TERMINAL DIE STATE SILVER DOLLAR EXPLORER
-
andywoj00
- Posts: 279
- Joined: Mon May 28, 2018 3:22 pm
-
Contact:
Post
by andywoj00 » Fri Nov 08, 2019 12:28 am
Nice Job Wayne....Andy
-
messydesk
- Site Admin
- Posts: 2447
- Joined: Mon May 28, 2018 1:57 am
Post
by messydesk » Fri Nov 08, 2019 4:12 am
Looks like VAM 27 is what Alan noted as VNA-5 in his die study. I haven't matched up VAM 28 yet. There are a lot of currently unlisted 1900-S die pairs
Welcome to the VAMWorld 2.0 discussion boards. R.I.P. old VAMWorld.
-
bjsilverfox
- Posts: 108
- Joined: Mon Jun 04, 2018 4:04 pm
Post
by bjsilverfox » Fri Nov 08, 2019 4:40 am
Congrats on your DC's. Keep up the good work.
-
blh74
- Posts: 527
- Joined: Wed May 30, 2018 1:28 am
Post
by blh74 » Fri Nov 08, 2019 5:20 am
Way to go, and a twofer.
-
PacificWR
- Posts: 1419
- Joined: Mon May 28, 2018 12:17 pm
- Location: Kansas Flint Hills
-
Contact:
Post
by PacificWR » Fri Nov 08, 2019 12:58 pm
-
PacificWR
- Posts: 1419
- Joined: Mon May 28, 2018 12:17 pm
- Location: Kansas Flint Hills
-
Contact:
Post
by PacificWR » Fri Nov 08, 2019 12:59 pm
ljs123 wrote: ↑Fri Nov 08, 2019 12:06 am
Yes, WTG Wayne.
Do you need help setting up the pages?
Ha, everyone knows that I would be of no help on the pages. You do so much good work on the pages, I wish that I could help you.
Thanks for all you do.
Yes I do. I like this. Glad to help out.
-
PacificWR
- Posts: 1419
- Joined: Mon May 28, 2018 12:17 pm
- Location: Kansas Flint Hills
-
Contact:
Post
by PacificWR » Fri Nov 08, 2019 1:00 pm
RogerRock wrote: ↑Fri Nov 08, 2019 12:24 am
Congrats Wayne! Your DC's reflect extensive die study on 1900 S .
Thanks Roger.
-
PacificWR
- Posts: 1419
- Joined: Mon May 28, 2018 12:17 pm
- Location: Kansas Flint Hills
-
Contact:
Post
by PacificWR » Fri Nov 08, 2019 1:00 pm
andywoj00 wrote: ↑Fri Nov 08, 2019 12:28 am
Nice Job Wayne....Andy
Thanks Andy.
-
PacificWR
- Posts: 1419
- Joined: Mon May 28, 2018 12:17 pm
- Location: Kansas Flint Hills
-
Contact:
Post
by PacificWR » Fri Nov 08, 2019 1:19 pm
messydesk wrote: ↑Fri Nov 08, 2019 4:12 am
Looks like VAM 27 is what Alan noted as VNA-5 in his die study. I haven't matched up VAM 28 yet. There are a lot of currently unlisted 1900-S die pairs
Not sure about Alan's list, but on my list VAM-27 was VNA-3. With the high number of VAM's with die cracks/breaks in the lower hair (currently 11) and high number of cracks/breaks in the cap (currently 12) I have created 4 new attribution guides. The red herring in the VAM listing is the 1900-S VAM-10A. Future plans call for adding high Resolution photo's to some of the VAM listings.
-
PacificWR
- Posts: 1419
- Joined: Mon May 28, 2018 12:17 pm
- Location: Kansas Flint Hills
-
Contact:
Post
by PacificWR » Fri Nov 08, 2019 1:20 pm
bjsilverfox wrote: ↑Fri Nov 08, 2019 4:40 am
Congrats on your DC's. Keep up the good work.
Thanks Bill.
-
PacificWR
- Posts: 1419
- Joined: Mon May 28, 2018 12:17 pm
- Location: Kansas Flint Hills
-
Contact:
Post
by PacificWR » Fri Nov 08, 2019 1:20 pm
blh74 wrote: ↑Fri Nov 08, 2019 5:20 am
Way to go, and a twofer.
Thank you.
-
jrfaust
- Posts: 239
- Joined: Thu May 31, 2018 3:25 pm
- Location: Cedar Rapids, IA
Post
by jrfaust » Fri Nov 08, 2019 2:26 pm
Awesome Wayne! Here's your "You Suck"

Love the twofer!
Who is John Galt?
-
fogie
- Posts: 558
- Joined: Thu May 31, 2018 9:45 pm
- Location: Arizona
Post
by fogie » Sat Nov 09, 2019 2:19 am
Outstanding!!!
-
PacificWR
- Posts: 1419
- Joined: Mon May 28, 2018 12:17 pm
- Location: Kansas Flint Hills
-
Contact:
Post
by PacificWR » Sat Nov 09, 2019 3:40 am
LateDateMorganGuy wrote: ↑Fri Nov 08, 2019 8:17 pm
Hey Wayne. If you have a VAM-16, cross check the new VAM-28 against it.
Hey Alan, the date placement is different.
-
PacificWR
- Posts: 1419
- Joined: Mon May 28, 2018 12:17 pm
- Location: Kansas Flint Hills
-
Contact:
Post
by PacificWR » Sat Nov 09, 2019 3:41 am
fogie wrote: ↑Sat Nov 09, 2019 2:19 am
Outstanding!!!
Thank you.